更換套頭步驟：
Steps for replacing insert:
1、把鎖頭按下
1. Press the lock
2、把鎖套滑向機體一側滑動底部
2. Slide the lock sleeve to one side of the machine body to the bottom
3、把撞針、大彈簧、小彈簧分別按圖示裝好
3. Install the striker, large spring and small spring as shown in the figure
4、把內套頭與外套頭分別與機器上的卡槽相對應并且卡入卡槽
4. The inner sleeve head and the outer sleeve head correspond to the clamping groove on the machine and are clamped into the clamping groove
5、向遠離機器方向推動鎖套鎖頭卡入鎖套的小孔使鎖套固定
5. Push the lock sleeve away from the machine until the lock head snaps into the small hole of the lock sleeve to fix the lock sleeve
6、套頭更換完成可以使用
6. The socket can be used after replacement
The above is the main content of the electric torque wrench to share with you. Please continue to pay attention to us for more wonderful content: http://www.sxmingxi33.cn
