表面處理
surface treatment
1．亮鉻：像鏡面一樣的光亮；
1. Bright chrome: as bright as a mirror;
2．亞鉻：無光澤；
2. Chromite: no luster;
3．電泳：黑色，有亮度，在外加直流電的作用下，使帶電粒子在分散的介質力向陰極或者陽極做定向移動，促使物質的分離；
3. Electrophoresis: black, bright, under the action of external direct current, the charged particles move to the cathode or anode in the dispersed medium force, promoting the separation of substances;
4．磷化：黑色，但光澤暗，把物質浸在磷化液中，在便面沉積形成一層不溶于水的結晶型磷，是鹽酸轉換的過程。
4. Phosphating: black, but with dark luster, the substance is immersed in the phosphating solution and deposited on the surface to form a layer of crystalline phosphorus insoluble in water, which is the process of hydrochloric acid conversion.
5．灰鎳：是一種全新的表面處理方式，防銹能力強，且會增加產品的使用年限。
5. Gray nickel: it is a new surface treatment method, with strong anti rust ability, and will increase the service life of the product.
6.其他還有發黑，鎳鐵合金，珍珠鎳，黑鎳和鍍鈦等處理

6. Other treatments include blackening, ferronickel, pearl nickel, black nickel and titanium plating
檢測要求
Testing requirements
1．不得有生銹，毛刺，裂紋和斑點等；
1. No rust, burr, crack, spot, etc;
2．扳口對稱，激光刻字要清楚；
2. The opening should be symmetrical and the laser engraving should be clear;
3．硬度要達到規定標準，且卡位要準確；
3. The hardness shall reach the specified standard and the clamping position shall be accurate;
4．活絡扳手的渦輪運作要靈活，銷軸不能松動；
4. The turbine operation of the adjustable wrench should be flexible, and the pin shaft should not be loose;
扳手的正確使用與保養
Correct use and maintenance of spanner
1.使用前，應根據被扭件規格及所在位置大大小，選擇符合規格的扳手
1. Before use, the wrench that meets the specification should be selected according to the size of the twisted part and its position
2.扭動手柄時用力要平穩，用力方向與被扭件的軸線垂直。
2. When twisting the handle, the force should be stable, and the direction of force should be perpendicular to the central axis of the twisted part.
3.使用扳手時，更好是拉動而不是推動，拉力的方向要與扳手的手柄成直角。
3. When using the wrench, it is better to pull rather than push, and the direction of pulling force should be at right angles to the handle of the wrench.
4.非推時，要用手掌推，手指伸開，防止撞傷關節。
4. When not pushing, push with palm and extend fingers to prevent joint injury.
以上 扭剪扳手就是給大家分享的內容了，想要了解更多的精彩內容請點擊http://www.sxmingxi33.cn 進入我們的網站，或者是搜索我們的關鍵詞查找，我們會有更多的精彩內容與您分享！
The above wrench is to share the content, want to know more wonderful content, please click http://www.sxmingxi33.cn  Enter our website, or search our keywords, we will have more wonderful content to share with you!